Skip to main content

Reply to "Lionel Lionmaster TMCC to ERR Cruise Commander M Upgrade Level of Effort"

The CC-M is a simple install as a rule.  Since this is an Odyssey equipped locomotive, you do have to either do some contact shuffling of the contacts in the Molex plug or splice the supplied plug in.  The Odyssey DCDS has a 6-pin power/motor plug, the CC-M has a 4-pin power/motor plug.  You also have to run the single wire serial data to the R2LC.

Here's the Cruise Commander M Instruction Manual, check out the installation process, you're looking for the Odyssey section for the plug wiring.

The Super-Chuffer II will certainly fit in that locomotive, I've done much smaller stuff.  If you want a prototypical 4-chuff/rev, you could also consider the Chuff-Generator.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×