Skip to main content

Reply to "Lionel Made K-Line NYC K28701H Diesel Unit wire not connected inside unit"

Aegis21 posted:

2) how do I go about upgrading to TMCC ?

Why does it have the run/program switch and an RS/SS switch?

 

You'll need the R2LC-C08 board to enable the TMCC capability, it replaces the reverse board in the right hand socket.  The RUN/PGM switch is the reverse lockout for conventional operation, when you upgrade it, it'll be indeed the RUN/PGM switch.  The RS/SS switch won't do anything right now as you have a Signal Sounds board.  If you replace that board with the RailSounds board and add the generic RailSounds Power Supply, you'll have full sounds.  Then the RS/SS switch will switch the sounds on/off, the horn and bell are always enabled.

Yes, and you'll have to hook up that antenna wire to the antenna it apparently broke off from.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×