Skip to main content

Reply to "Lionel NYC Mohawk L-3A #3005, 6-18064 does not Respond to TMCC"

With the boiler shell removed, I would carefully pull the antenna plug off the circuit board.  And then stick a small wire in the end of the plug, even a sewing needle if you do not have anything else available.  Be sure it is in the side of the plug that has the electrical contact inside it leading to the black wire. Then I would check to be sure that you (have continuity) from the plug to the antenna on the outside of the boiler shell. If you have continuity from the plug end to the outside antenna rail. Than at least  you know that the antenna wire has not been damaged. Then as gunrunnerjohn stated you may have a bad R2LC board.  As I previously stated,  you can actually break the contact between the black antenna wire, to the inside of the railing. Without it showing or being broken right off. 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×