Skip to main content

Reply to "lionel Odyesey J1a"

Since this is a TMCC locomotive, I'd start by putting a 1uf 50V non-polarized cap across the coupler outputs on the tender motherboard.  The cap should go right across the connector for the coupler, I typically solder them to the underside of the motherboard on the coupler connector pins.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×