Skip to main content

Reply to "Lionel SC-2 and TMCC signal issues"

Cathryn:

found this on another SC-2 post. don't know if it has anything to do with your issue but thought I would paste it here.

The SC-2 needs to receive a signal from the house wiring ground. An easy test is  to temporarily lay a three wire extension cord next to the SC-2. The extension cord must be plug  ged into a three prong outlet. The Cab-1 does not talk directly to the. SC-2. Placing your hand next to the SC-2 will let see a stronger signal also. If this experiment improves operation, a permanent solution would be to install a ground wire near the SC-2.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×