Skip to main content

Reply to "Lionel Smoke fluid Loader/Use"

This is the way my Prototype was done. The 5/32 ID hose ran from the pump directly to the boom. the feed hose had a reduction barb that went from 5/32 to 1/8. A small tyrap was used to lightly anchor the hose to the boom. this made it pretty much bullet proof. If any of you decide to retro your unit in this way make sure you route the 5/32 hose as shown in the photo. 

Ernie

PS ignore the piece of wood and the hose looks bigger than it really is in the photo.

Attachments

Images (1)
  • pump1
Last edited by Lionel2341

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×