Reply to "Lionel Smoke fluid Loader/Use"

nmtrains posted:
Lionel2341 posted:
cjack posted:

Still getting some fluid seep at the rear wall so I separated the two panels it's made of and the middle was totally saturated with smoke fluid. Must have creeped up by capillary action. Ack!

Not sure why you're still having problems, Chuck. I've been running the "Quick Fix" since I got home from York and found the problem. No leaks at all. You could also try the permanent fix using the full hose and barb. just a suggestion.

Ernie

 

Ernie,  Personally I like the 5/32 fix- but I cannot find a source for the barb reducer! Could I impose on you for source /purchase? Thanks in advance sir.

https://www.sullivanproducts.c...ponentsMainFrame.htm

Scroll down on this page and look for aluminum tubing adapter # 485

Ernie

 

Proud Member of the OGR Family, Designer of Unique TMCC Products, Lionel Collector and Operator, Lionel Beta Tester, Original Train-Ca-Teer Member

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
×