Following up on this discussion I'm happy to say the repair was a success and it was indeed the AC regulator the gave out. Thanks again everyone for all your help.
@gunrunnerjohn posted:When you do the repair, the easiest way to do it is to cut the new regulator wires to about 2" and just splice into the existing four wires. When you cut the old regulator out, leave yourself plenty of length for the splice. Trying to follow the wires to the final connections is doing it the hard way.
@Steims posted:The 2 black wires are electrically connected on the board. So you can either simply cut one or combine them together and connect to the appropriate wire on the chassis.
