@Linda J posted:Hi. I am rather new here, but here goes. Received the lionel universal remote along with my 2021 PA LC 2.0 Baby K 4 that I waited approx 8 months for.
I cannot seem to pair the remote to the loco. Remote cover says V1.3. The loco runs off the transformer but cannot pair it to the remote.
Any suggestions?
Linda J
Did you try this first?
To Pair a Locomotive to Engine Selection button #1
1. Turn on power to your Universal Remote
2. Press and hold Engine Selection button #1 until it blinks rapidly.
This will clear any previously stored pairing information so you can
connect to the new target locomotive.
3. Release the button. It should flash slowly, indicating it is not con-
nected to a locomotive.
4. Place the target locomotive on the track and apply track power.
5. Tap and release Engine Selection button #1. The remote will now
seek and connect to the first available locomotive it finds.
6. Engine Selection button #1 should now be on (no flashing) and if
the locomotive was beeping or chirping, it should now be playing
engine background sounds.
7. Run the locomotive!
This locomotive pairing is now stored in your Universal Remote. The next
time this engine and remote are powered on, the connection will be auto-
matically re-established.
To Pair a Locomotive to Engine Selection buttons 2 or 3, simply fol
