Skip to main content

Reply to "Lionel USRA 2-6-6-2 LEGACY Upgrade (9/03/20)"

Update:

So, after some grinding and some hole drilling, I got the smoke unit installed. Whistle steam elbow made. The shell is all wired up. The lights work as they should. The smoke output is amazing.

I need help!

I ran into a problem of course. During my testing, I was running the loco. Then it stopped. I lost all command. I thought maybe my legacy base got disconnected. Nope. I hit the reset button for the engine, nothing, it just sat there. The headlight wasn’t flickering.

I cycled the power, got the loco to move again, ran about 2 inches then stopped. No control again. I swapped the RCMC out with another and I still have the same issue. I thought maybe my handrails were grounding out so I used my meter, nothing. It was running fine with the shell off. Makes me think its a radio signal issue due to a grounding problem. I dunno. 

Usually I’m the one with the fix 😂

 

3FF5C2AF-40FF-4D71-A9C6-D2B34B2E4807EB0F4FA2-1CF7-47DA-86F6-A3004D9A6C3D

Attachments

Images (2)
  • 3FF5C2AF-40FF-4D71-A9C6-D2B34B2E4807
  • EB0F4FA2-1CF7-47DA-86F6-A3004D9A6C3D
Videos (1)
45C3A845-377F-4297-807E-FD532F71E55B
Last edited by Bruk

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×