Skip to main content

Reply to "Lionel ZW & 2 power bricks"

@cjack posted:

I've been using a ZW-C with 180 bricks and Legacy chip for about 15 years. I don't do a lot of voltage changing since the C will turn on B and C outputs where ever they are set when power is applied. The ZW-L does not do this, you have to raise the handles every time you turn it on. The reason why I never bought one. I realize the way I use the C, I could just use the bricks alone. But I like to see the voltage and current on the optional display...even thought the current is not quite accurate per output.

cjack, we have had this discussion before.  The ZW-L in conventional mode, will keep the voltage at the level set by the handles when turned off then on.  I’ve been running my layout like this for over four years.  Handle stays raised to 18 volts each time it’s turned on.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×