Skip to main content

Reply to "LionMaster Challenger 6-82694 advice needed *SOLVED*"

I took a video of what's happening before doing anything else. Since it only occurs for a second or so I had trouble stopping the engine with the issue occurring while stopped. Once I was able to do that entering AUX1 + 0 did bring the sound back on while stopped. I checked the draw bar and both IR sensors were in correct alignment. Once I started running again the issue continued as before. I then checked the springs on the trailing truck and the tender truck and both appear normal and have good compression. I then tugged at the IR wires and none of them came out. However after tugging on the wires and running the engine again the sound issue was less frequent and occurred while coming out of left and right curves. I'm thinking loose IR wire, but I can't argue against needing a firmware update.

 

Attachments

Videos (1)
3989BeforeWireTug

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×