Okay guys,
Last night I hooked up my new Legacy 990 to my Fastrack (using Powerhouse 180). I followed the directions and the black wire is hooked from the Legacy base to the common on my Fastrack.
Placed the Lionmaster T-1 on the track (note: I have the non-Legacy TMCC version with Railsounds). Programmed it to be ID 2 (Lionmaster Legacy Big Boy is ID 1). It worked great! Odyssey speed control was nice and smooth. The Cab 2 is set to operated the T-1 in Cab 1 mode.
Next I started up an MTH diesel on the same track using the MTH DCS system. Sure enough, both systems worked perfectly on the smae track simultaneously. I turned of the TIU and out the MTH diesel away so I could focus on running only the Lionmaster T-1.
As I was operating the T-1, it was a good opportunity to learn some of the features on the Cab 2. I must have punched in some command and now the T-1 will not move forward or backward and I don't know how to fix the glitch. The T-1 starts up fine/ shuts down fine. The bell, whistle and crew talk all work great.
The only way I can get the T-1 to move is if I hit the boost button. It starts moving, then takes off like a runaway train. When I take my finger off the boost button, the T-1 slows then stops.
The red dial to make the engine move is having no affect on making the T-1 operate. I turn the dial and the engine just idles, purring as usual.
I did attempt to reset the engine. No affect. I changed the engine ID from 2 to 3. Same thing.
I read the directions, but I could not find any help.
Do any of you experts have any suggestions? I want to run my Pennsey "South Wind" passenger car set tonight.
Note: I also programmed the South Wind Stationsounds car. It works great using the Legacy Cab 2 using ID 99.
