Skip to main content

Reply to "Lionmaster T1"

Are you SURE the flywheel magnet ring is the proper spacing from the sensor?  It should be around 1mm above it. Are you sure you put the ring on the proper orientation?  You should NOT see the dimples in the surface, they should be under the glued side.

The ground strip should be fixed, but that's not what your issue is.

Last edited by gunrunnerjohn

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×