Skip to main content

Reply to "Locomotive Issue - Protosound 2 - Flashing and restarting when trying to move"

one thing you should try first is cut power when you hears sounds if sounds died immediately your battery is DEAD! you can try charging battery and then try again!

you might try a conventional reset while powered up and not moving, if it resets you'll hear 2 whistle toots. if it wont reset board probably needs repaired if you can find one it is a ps 2 3 volt board inside the engine or tender! p.s did you charge the battery before you tried the engine?

Alan

Last edited by Alan Mancus

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×