Skip to main content

Reply to "Looking for MTH CV board AG-0000012"

Thanks, George.  Yes, will be using the board from John to assist and check what outputs should be.  Notice the board I have in my BB is soldered connections, does not use the connectors, except the white one for the cab and firebox.  That is the white one located next to the coil.  Also, the location/output #J2, (other white connector) does not have anything soldered to it on the CV board in my BB.  I assume it is one of the earliest versions as I bought this BB in 1997... so it does have some years on it, and a lot of run time.

Thanks for your input, sir.... from all of you fine fellas.

Jesse

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×