Skip to main content

Reply to "Looking for simple way to drop voltage for Trolley speed control without controller"

Thanks again Rob.

 

I held all three buttons down and the green light was flashing on each one although I used a volt meter without a load. I didn’t want to take a chance on smashing my trolley again.

 

One transformer will not adjust at all and remember one of the CW80s stopped working completely about 3 or 4 years ago and that I had to take it apart to do some soldering to get it working again. I don’t remember all the details, but this might be the one I worked on. Anyway I’m going to put a paint mark on it so I remember which one it is.

 

And I don’t have any idea as to why the other will not keep its setting. But my trolley has been running just fine on the only good one and I’ve turned it on and off a number of times. I probably will not need the other Accessory Terminals because everything else I have is DC.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×