Skip to main content

Reply to "Looking for tips or advices for the early Williams Dreyfuss Hudson to run"

IMG_20170507_160010IMG_20170507_160034IMG_20170507_160049IMG_20170507_160410IMG_20170507_160441IMG_20170507_160453IMG_20170507_160513IMG_20170507_160531IMG_20170507_160544IMG_20170507_160817IMG_20170507_160844IMG_20170507_160900IMG_20170507_160938IMG_20170507_161007IMG_20170507_161039IMG_20170507_161109IMG_20170507_161139IMG_20170507_161328Hello guys and gals.....

I sprayed primer the bodies today and the results is really better than I expected !!!  In few days I will spray paint the silver on.  I made a 8 OZ weight using 2- 4 OZ cannon ball lead weights and epoxy it in the short section of the PCV tube to make into a boiler weight for the front of the engine. I ordered 20 feet of super flex wire for the roller pick ups of the passenger cars.  I cut out 2 pieces of gray plastic to put the "Burlington Route" decals on that I ordered from Dave of LBR last night as it is in custom size (smaller one for the nose of the engine and larger one for the back door of the observation car).  I should be finishing the Hudson this month as there is not much left to do for it.   Here are the pictures guys !!!

Now it was not written for his sake alone that it was imputed to him, but also for us. It shall be imputed to us who believe in Him who raise up Jesus our Lord from the dead. Romans 5:23-24 NKJV

Tiffany

Attachments

Images (18)
  • IMG_20170507_160010
  • IMG_20170507_160034
  • IMG_20170507_160049
  • IMG_20170507_160410
  • IMG_20170507_160441
  • IMG_20170507_160453
  • IMG_20170507_160513
  • IMG_20170507_160531
  • IMG_20170507_160544
  • IMG_20170507_160817
  • IMG_20170507_160844
  • IMG_20170507_160900
  • IMG_20170507_160938
  • IMG_20170507_161007
  • IMG_20170507_161039
  • IMG_20170507_161109
  • IMG_20170507_161139
  • IMG_20170507_161328
Last edited by Tiffany

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×