After. The dish has a shaft sticking out of the bottom. You need to attach the shaft of the dish to the armature shaft. The motor comes with a couple of attachments, but I found a better solution. What you see in that picture is a rubber "foot" from either a cabinet door or piece of furniture. I'm not sure where I got them, but they were in my parts drawers in the garage. I drilled out the top with a bit slightly smaller than the shaft on the dish and drilled up from the bottom with another bit (the armature shaft is alot thinner). Then all you have to do is squeeze them together. Easy. But part of the reason is I could leave the motor mount on my MTH in place and it became a perfect fit. Again, I don't know what the Lionel will be like (whether the motor can be removed from the mount). Waiting for someone to take their's apart.
|
|
