First- @tom caron the Atlas 40’ technically don’t fit in the wells as the pegs at the bottom of the K-kine well cars have pegs that are too large for the Atlas’s very small peg holes. That said, as both the K-line containers and Atlas are scale and share the same distance between pin holes, and Atlas 40’ can fit on top of a K-line 40’, 2 k-line 20’, 2 Weaver 20’(with modification), and two RoW 20’ roughly work with an Atlas 40’ above- although they’re a bit short leaving a gap in the middle.
Sorry to restart such an old thread- but this opportunity seems like a good one to introduce my idea for the trying to re-post and add info from the original intermodal thread. I’ve been compiling info on dimensions for intermodal containers(Length, width & height), the dimensions for each well, the “adapter” method for each container or well car(fixed pegs, removable pegs, pegs protrude from well), and a compatibility matrix of what containers fit in which well cars or on/under another brands container.
There are a couple of issues that have prevented me from posting:
1.) determining the scope: I would like to include things like K-line, Weaver and other flat cars but that was proving to be a bit much
2.) I don’t personally have- Lionel Husky Stacks cars or containers , MTH Premier Husky stacks cars, or 2 or 5 car spine sets
That said, might give it a shot with what I have