Skip to main content

Reply to "Methods for Removing Factory Paint off Plastic Models?"

Bruk posted:
big train posted:

You cannot use the 70% type alcohol.  Only the 91% type.  

What about anything higher than 91%, would that work? Curious because I have access to IPA at work

I don't think it's a problem to use something with a higher content, if you have convenient access to it.  70% and 91% are the two types most easily acquired at the local drug or grocery store.  Between those two the 91% is the way to go.  I did briefly look into buying from a supplier so that I could get a bigger volume, by the gallon.  It can take a lot of alcohol to fill the size tub needed for an O scale loco or car.  You can get a funny look or two when you checkout with 20 small bottles at the store.  

For the tub, I just used a plastic storage container.  But another good idea is a wallpaper hanger glue trough.  It's the right shape for O scale type stock.  But no lid, so I would cover it with plastic wrap or similar to prevent evaporation.

It would appear that 99% costs about 4 times as much as 91%, based on GRJ's link, but if you have it at work then that's not an issue.

Jim

Last edited by big train

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×