Skip to main content

Reply to "Modern Locomotives & Postwar Operating Cars"

If you are running a modern loco with TMCC / DCS remember there is going to be high voltage at the rails and UCS tracks if running un-modified wiring. That may be too high and the plungers of the dump cars may stick. And coil couplers will overheat if the car (if equipped) is operated too often. Something to plan for.

Thanks, Chuck

 I don't have DCS or TMCC, but I have run LC+ locomotives in remote mode at 18 volts pulling Postwar coal dump cars, and so far there have been no problems.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×