Skip to main content

Reply to "Motors in new MTH locos vs Motors in older MTH locos"

On these models the PS3 tach reader is mounted below the motor facing upwards. There is not a lot of room and so the rear most set of through hole solder connectors are removed from the tach reader board. A little too much solder on the tach reader and it can contact the frame (ground) and bad things can happen.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×