Skip to main content

Reply to "Moving layout -what to do with wiring?"

I built my layout in sections.  4 x 4 ish sizes.  I have not done this on all sections but I have on some.  At the break points I have the black terminal blocks one on each side of the break point, then a jumper.    For other sections I used the layout wood as the terminal block, I cut the wire, screwed each end to the board and ran a jumper across the break point.   Since they line up across from each other there is no real need to label the wires, and they are secure to the board.

Last edited by Edmund Schwartzel 060518
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
×