Skip to main content

Reply to "MTH 20-3079-1 PS3 conversion"

gunrunnerjohn posted:

No inductor needed if you're just using a resistor and the LED's.  I'd start with a series 1K resistor and see about the brightness.  You can go from around 750 or higher to adjust the brightness of the class lights.

Note that the LED is in series with one side of that connector wiring to track power.  The other side goes directly to track power.  You can also toss in a series diode for a longer life for the LED's.

Ah so since the marker/class light LEDs are series wired from the factory I can get away with just the resistor. Makes sense.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×