Skip to main content

Reply to "MTH 30-2220-0 SW-8 w/ Loco-sounds...operating issue 4/3 Update- Problem Diagnosed- but not gone"

I checked the two screws on the trucks with the red and black wires, I didn't pull them off but loosened and re-set the screws.  I also made sure the plugs were seated properly on the boards.

I did notice some grease on top of the trucks and am wondering if it was over greased and it's causing the bad connections.

I'd pull the trucks and clean them up but I don't see how to remove them.

Thanks again.

Last edited by RSJB18

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×