Skip to main content

Reply to "MTH 44 tonner stalling issues"

I removed the plastic insulators...and...it had no effect on the area my 44 tonner was stalling.  Using alligator clamps, I placed a lead from the outside rail of my Atlas O track to the point at which the truck side frames attached to the 44 tonner and ran it through the point at which the engine stalls.  This had no effect either. 

My conclusion can only be that my switches are not level (for one reason or the other) and the engine's tolerance for such sloppy track work is very small.

Any thoughts??

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×