Reply to "MTH Banjo Signal Wiring"

stan2004 posted:

I've been patiently waiting for someone to post photos of the guts of the MTH Scaletrax ITAD!

Since you have the ITAD open, look carefully at the wiring on the 5 inside terminals of the screw-strip.  I believe you will find that the "COM" terminal is internally connected to one of the AUX power terminals.  I say this because that's how the MTH Realtrax ITAD is wired:

If this is the case with the Scaletrax ITAD:

- disconnect the red wire with hot power that is now connected to ITAD "COM" screw terminal

- disconnect the Banjo black wire from common power; instead, run this black wire to the ITAD "COM" screw terminal

In other words, the 2 Banjo wires directly connect to the ITAD.  Red to "NO", Black to "COM".

Thanks. I'll check it out and give that a try.