Skip to main content

Reply to "MTH DCS and Lionel LionChief plus at the same time?"

Lionel man UK posted:

I was on the understanding that the two,(MTH & Lionel) can not be run on the same track together as MTH is DC and Lionel is AC I wanted to do the same, but I watched a you tube video from Eric's Trains and he stated it was not possible. I have invested a lot of my pension on Lionel where as MTH is cheaper and with better sounds. I started with Lionel so that's what I have.

MTH Engines normally take AC track voltage in a 3-rail operation. The DCS command system will take AC or DC track voltage as a source and control the MTH locomotives. Lionel TMCC/Legacy are for AC track voltage only. At the club, we run TMCC/Legacy and MTH DCS at the same time and have been doing so for more than 15 years.

One important note: If using a Premier MTH locomotive equipped with Protosound 3, make sure the DCC/DCS switch is set to "DCS". I've had two locomotives new out of the box with the switch improperly set.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×