David,
Three things...
First, turn on the DCS signal for all channels: Menu/System/DCS Setup, press soft key AON.
Second, make sure that the red terminal of Fixed #2 is connected to the center rail of the inside loop and that the black terminal is connected to an outside rail.
Third, see if Fixed #2 Out works with the outside loop. If not, the problem is with the TIU's Fixed Channel #2.
This and a whole lot more about DCS is all in MTH’s “The DCS Companion 3rd Edition!" This book is available from many fine OGR advertisers and forum sponsors, or as an eBook or a printed book at MTH's web store! |
This and a whole lot more about DCS WiFi is all in MTH’s “The DCS WiFi Companion 2nd Edition!" |