Skip to main content

Reply to "MTH DCS QUESTION&ATLAS DECAL QUESTION"

It's all in the words.

If you look at the bottom of the brick, that is a barrel jack.  He would need 2 banana plugs to go into the TIU fixed 1 or just use the wires and screw the nut down.

Since this is the 2 rail forum I am assuming he is running 2 rail DC trains.  If so then he would need to put the barrel jack from the Z1000 brick into the AUX power jack, to power up the TIU.  Then using the two wires to the track he could run the TIU in passive mode to run DCC or DCS to his DC power engines. 

If you are running AC engines then you would need to do 1 of 2 things.  Cut the barrel jack off and use the two wires to feed Fixed 1 IN and your track wires to Fixed 1 OUT or use the brick to AUX power and get another transformer to connect to any of the inputs.

Gene Anstine

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×