Skip to main content

Reply to "MTH enters S scale market"

This is the feature write up from a PS-3 Ho product. It talks about having DCC on board. I would think the S Helper enhines by MTH could be like this:

 

 

Proto-Sound 3.0 equipped locomotives can be controlled in command mode with any DCC compliant command control system. While the user won't have access to all of the incredible features of Proto-Sound 3.0, independent control over the locomotive is possible. This means you can continue to use your existing DCC controller to independently control your other DCC equipped locomotives in addition to your Proto-Sound 3.0 locomotive on the same track at the same time.

When using a DCC controller, the following Proto-Sound 3.0 locomotive features are accessible:

  • F0 Headlight
  • F1 Bell
  • F2 Horn
  • F3 Start-up/Shut-down
  • F4 PFA
  • F5 Lights (Number Board)
  • F6 Master Volume
  • F7 Front Coupler
  • F8 Rear Coupler
  • F9 Forward Signal
  • F10 Reverse Signal
  • F11 Smoke On/Off
  • F12 Smoke Volume
  • F13 Grade Crossing
  • F14 Coupler Slack
  • F15 Extended Start-up
  • F16 Extended Shut-down
  • F17 Rev Up
  • F18 Rev Down
  • F19 Engine Sounds (On/Off)
  • F20 Single Horn Blast
  • F21 Coupler Close
  • F22 Feature Reset
  • F23 Idle Sequence 1
  • F24 Idle Sequence 2
  • F25 Idle Sequence 3
  • F26 One Shot Doppler (On/Off)
  • F27 Brake Sounds (On/Off)
  • F28 Cab Chatter (On/Off)
  • Proto-Sound 3.0 With The Digital Command System Featuring: Freight Yard Proto-Effects
  • Unit Measures:13 7/8” x 1 7/16” x 2 3/8”
  • Operates On 18" Radius Curves

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×