Skip to main content

Reply to "MTH F3s and Kadees"

I just used a 2-56 machine screw, nut and washer to bolt a 743 to the casting to which the MTH fixed coupler had been attached.  I used the "gear box" for the 743 as a shim, up-side-down, and I was good to go.  The fact that the coupler is attached to and swings with the truck is a plus.

IMG_7428

You can see by the length of the MTH coupler shank that the Kadee 743 mounted where the Phillips head screw attaches to the casting will give an much, much closer coupling.  However, as stated earlier, you've done an elegant job of body mounting the 743.

Attachments

Images (1)
  • IMG_7428

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×