Skip to main content

Reply to "mth o gauge dash 8 running over atlas switches"

Do you have any of these switches back to back or connected directly to other switches? Sometimes when you do that the 'dead spots' (no power) end up just right with certain engines so no pick up rollers are touching.

One thing to try is when the engine stops, note where the pick up rollers are and see if there is power to either one. Also check both pick up rollers to make sure they are both working and that a wire hasn't come loose somewhere on one of them.

The curved switches probably all cause a problem with an engine or two sooner or later just due to the way they have to be made because of the curve and the distance between the powered rails.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×