Reply to "MTH pennsylvania caboose w operating signalman"

From the MTH instruction manual P. 2;

There are two ways to operate this caboose.

1) Auto allows you to operate the signalman with the bell button on any AC Transformer equipped with a bell button or DCS Remote.*

2) Operating Track System (OTS) allows you to activate the signalman using the unloading feature on your operating track sections.

AUTO OPERATION

1) Move the switch on the bottom of the car to the Auto position and place the caboose on track.

2) Hold down the bell button on your transformer or your DCS* remote for 1-2 seconds

3) The caboose will automatically cycle. The signalman will swing out with a lantern, and then will go back to the rear of the caboose, ending the cycle.

4) Press the bell button again to begin another cycle.