Skip to main content

Reply to "MTH Premier Santa Fe Hudson MUX Board Issues (20-3144-1)"

I didn’t watch your video, ….it was taking too long to load,…..but, if you wiggled the harness near the mux and things began to work again…..suspect a cold solder joint on the pins of the mux, …if you have a steady hand, and good soldering practices, should be an easy fix….also look at the harnesses for pushed out female pins, etc,…

Pat

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×