Skip to main content

Reply to "MTH Premier Santa Fe Hudson MUX Board Issues (20-3144-1)"

Hey Pat,

It measures 320mm long or 12.5 imperials +/-.

Took a look and it does not seem to come up at MTH's parts site, might have to get the 230mm open you sent and make it longer IF need be. The harness in the tender has a lot of slack so it is extremely possible the 230mm would work w/o modification.

I will wait till the morning to see if you gurus find an longer option (((Suppressing Thats what she said jokes))) and if not then what you sent above will work, I have done much worse with thinner wire.

Thanks gents!

Push come to shove, relocate the female receptacle in the tender so it’s closer to the front of the tender……I want to say it’s facing straight up in that engine. Perhaps turning it to run parallel with the tender floor will gain you the extra length needed …….I’d move the receptacle before I cut the tether up only to find out the dead pin follows you …..

Pat  

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×