Skip to main content

Reply to "MTH Proto 3.0 steam upgrade kit install question"

Au Contraire!  That is NOT universally true!  Several shipments of upgrade kits have shipped with either defective chain files or even one shipment with diesel chain files!  Also, if you are upgrading and using the small single resistor smoke unit, you need to use the proper chain file set for that smoke unit.  And, even the most recent chain file for small smoke units was erroneously released with the hardware file for the large smoke unit.  Anyone doing PS/3 steam upgrades is well advised to know and understand the ramifications of the chain files for the PS32 board.

So you are assuming the op has a defective chain file or a single resistor smoke unit?

Sending the op down a path thinking he has to install a chain file for a standard 32 upgrade is well....not called for unless he runs into issues or states that he is using a smaller smoke unit.  

One would NORMALLY just load a ps2 sound file.  

Last edited by David Minarik

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×