Skip to main content

Reply to "MTH PS1 Gas Turbine Conversion to ERR TMCC"

There's a socket on the CV board with a dropping resistor for marker/class lights if the unit is equipped with them.  They can, as George says, also be connected to the output on the PS/1 board, the yellow connector.  Easy way to find out, trace the wires from the spring contacts on the frame to where they go.  I'd guess the PS/1 board for this one as I don't believe that particular lighting board has the LED driver socket, the ones I have are all either MARS, headlights, or cab lights/number board outputs.  All the bulbs are 6V.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×