Skip to main content

Reply to "MTH PS2 Engine Problem"

Did you try putting tape on the center rail as mentioned above By LLRRSTEAMER ? or use a continuity meter at the work bench to check out the continuity between rollers. The engine doesn't have to be moving just park one set of rollers on the tape, the other set should fire up the engine.... repeat with other roller.

If you don't have a volt meter try the tape. it's an easy test.

Last edited by Gregg

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×