Skip to main content

Reply to "MTH PS3.0 Engine will not add to the remote/ will not run in conventional mode/will start up if another PS3 engine on same track, but still will not run"

There should be two wires on the DCS/DCC switch. Connect the two wires together and see if it fires up. Connecting the two wires together will put the board in DCS mode.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×