Skip to main content

Reply to "MTH REAL TRAX ELECTRICAL GREMLIN"

Hi Gregg....  Thanks so very much for the quick response.  Yes, to isolate the center rail could be an option.  We looked at the manual for the O31 turnouts and MTH recommends isolating the rails the way we did.  The problem is with the joint at the turnout at the green arrow.  The inner "siding" isolates just like the way the diagram on page 14 of the manual shows...

Everything else is isolated.  We did flip flop the SPST toggles and had the same results.   And yes, again, we are aware that the whole train won't stop until the last car clears the break. 

We would like to keep the non-derailing feature of the turnouts but wonder if that could be the gremlin. 

Thanks bunches for your help..

 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×