Joe Allen posted:I looked in my MTH DCS user's manual and it doesn't show any breaks in the track. What manual are you looking at?
I break the center rail and all my track is connected on the outer rails.
I'm with Gregg and Robert !
Hi Joe... the manual for the REAL TRAX 031 switch. The diagram on page 14..
Galon posted:Stan
When you made the turnouts work on auxiliary power did you
A: Remove jumpers in both turnouts?
Hi Galon... Yes... Both Jumpers were removed...
B: Are you certain that the neutral for the auxiliary power is on the middle terminal of the turnout?
Yes...........
C; if B is yes , remove all wires from the five screw terminals see if problem goes away
We'll try that. Thanks so much..
Galon Tonell