Skip to main content

Reply to "MTH remote - Out of RF Range"

First, if you have loaded 6.1 in both TIU and Remote, you can test communication with remote by addressing TIU via menu and see if you can read software, change TIU channel.  IF that is all working and communicating you have eliminate that.

Now the question is the TIU communicating with the engines.  The remote told the TIU find an engine, can the TIU do it.

LED on and flashed proper time for TIU address?  Polarity to track right?  Track have power?  Just one engine at a time?  If it can't find engine, does engine work conventionally?  If so, do a recover engine via menu?  If it finds it, move on to the next.  If not you may have a tiu fault.  You can try a different channel like fix 2, but you need to still power fix 1 or aux power to get tiu power and the Red LED on.  But some tiu casualties effect all channels.  If the engine stays quiet when track power applied via tiu you at least have the watch dog signal making it out and keeping engine shutdown, but it may not have the strength to load an engine or receive communications back from engine.   G

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×