Skip to main content

Reply to "MTH Restoration Big Boy Issue or not?"

Scouting dad, I have found by turning the locomotive around DCS will find it. Yes, I do have my outer rails isolated because I am using MTH realtrax with MTH's power lockon which only sends the negative to one outer rail. Is this typical on all 2/3 rail proto3 locos. I have other p3 locos without the 2/3 rail switch that show continuity between wheels on the same axle. So, by switch being in 3 rail, should I read continuity between wheels on the same axle? Even if there is a diode in the circuit, I am metering directly between 2 wheels on the same axle. So is it absolutely necessary to have both outer rails tied to ground? If so I am beginning to see that MTH's track power lockon is not really designed for a 3/2 rail loco.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×