Skip to main content

MTH S-2 Board Fried

Well, I was having fun with my S2 (20-2497-1) maybe a little too much. Turned on the smoke to high rmps to have it really pour out smoke. It ran great for around 20 minutes. Then all of the sudden, it just stopped, didn't short out or play the shut down sounds (the battery was fully charged) anything just stopped. Then I turned it back on (after cycling the power) and started running it again (the same way as before). It ran fine for around 10 minutes, then it stopped again again no short or shut down sounds just stopped on a dime. This time after I cycled the power, nothing, no response in command (running through an MRC pure power dual with the wifi app). So I opened it up and turned it on in conventional on my workbench (using a CW80) it was acting weird. Included is a few videos and pictures of the board and smoke unit. Is there any way I could save the board and smoke unit or are they both as good as gone? I threw in a spare 3v board which I've since loaded the S2 sound file in so it works now just no smoke.

Attachments

Images (5)
  • 20210220_224805
  • 20210220_224814
  • 20210220_224824
  • 20210220_224918
  • 20210220_230229
Videos (2)
20210220_211236
20210220_214414_1
Original Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×