Skip to main content

Reply to "MTH smoke unit for a TMCC upgrade"

You will have to change the resistors for the MTH smoke unit for TMCC use.  I use a 20 ohm 3W resistor in the two holes closest to the stack output and just solder the other two holes for the second resistor over.  If you don't use my Super-Chuffer, you'll have to supply a fan power supply, 5V for continuous smoke, or provide some chuffing provision.  The steam smoke unit (small posts) part number is AA-0000070, that's the one I use in steamers.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×