Skip to main content

Reply to "MTH smoke unit part numbers"

rplst8 posted:

I recently acquired a used MTH Premier Alco S-2 PS3 model # 20-20585-1. It's a light smoker, and when I opened up the smoke unit it looks like I definitely need a new wick but also probably a new smoke unit. The gasket between the fan and fluid reservoir is in rough shape and the heating element looks pretty rough.

Don't expect too much from that smoke unit, it's nothing like the full sized smoke units as far as output. 

Use GREAT caution when you reassemble this unit!  If that resistor shorts on either end to the case, you will be shopping for a new PS/3 board!  The clearances are pretty tight in there.  Some of these units have a lining to prevent the resistor from contacting the diecast sides, but the last couple I took apart didn't have that lining.

Attachments

Images (1)
  • mceclip0

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×