Delta14Sierra posted:David Minarik posted:Delta14Sierra posted:David Minarik posted:Just curious what your signal strength is where each engine is located. Are you using just one channel on the TIU?
Thanks,
Dave
Signal strength is 10 throughout my layout. I have two separate runs so I am use both channels of my TIU.
Again, just curious, what happens if you keep the engines in the FIXED 1 zone and turn off FIXED 2?
Thanks,
Dave
Interesting... I relocated all 9 engines over to FIXED 1 and only powered up that side of my Z-4000. ALL 9 engines were "Read" immediately, placed on the "Active" list, and I was able to fire each one up one by one.
Hmmm... So what does that now tell us?
I have two layouts (3 TIUs).
One small one at the shop with 1 TIU. The app will not find any engines (time out error) with the Fixed 2 channel powered up. Even with no engines on that channel.
My home layout, which is much larger and more complex, has two TIUs. The app will find engines on 3 TIU channels. When the fourth channel (fixed 2) is powered up, I get the time out error. No engines can be found and everything is moved to the inactive list.
All signals are strong. All TIUs are Rev L.
I have not tried different TIUs or different TIU channels. That would be the next step.
I initially thought that it might be a signal issue with my layout but now suspect something else.......... A little more testing is needed. Keep us posted as to what you find.
Dave
