You are welcome. If you just want to get things going, my setup is pretty simple, but no wifi. This is pretty basic and since I don't know how far along you are with either system, just disregard the following paragraph if you already have things up and running as described below.
I had DCS first so my layout is wired for DCS per Barry's book. The layout is powered through the TIU channels to the tracks, I added Legacy by just connecting the Legacy base signal wire to all commons on the TIU outputs and it was up and running. I don't have any cables (like the MTH 50-1032) connecting the two systems together. I have to run MTH with the MTH system and Legacy/TMCC with the Legacy system. I can't run Legacy/TMCC with the DCS system, but that's just how I wanted it set up for my own use. This might at least get you up and going to gain some experience running things. Then you can add the wifi stuff maybe a piece at a time or something like that as you learn more about each system.
